CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Adjacent cell zone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 9, 2013, 15:50
Default Adjacent cell zone
  #1
New Member
 
Join Date: Jan 2013
Posts: 2
Rep Power: 0
rad2013 is on a distinguished road
Hi, I have a question about cell zones. I have 2 boxes, one inside the other. The inner box has water and this box is surrounded by air (the region between the two boxes). How do I ensure that the "adjacent cell zone" to the inner box if defined as water, is indeed inside the inner box?

Any advice is greatly appreciated, thanks!
rad2013 is offline   Reply With Quote

Old   January 10, 2013, 02:54
Default
  #2
Senior Member
 
SSL
Join Date: Oct 2012
Posts: 227
Rep Power: 5
msaeedsadeghi is on a distinguished road
select and open setting of the boundary condition of the face. It have been written in that menu box that which zone is it's adjacent zone.
msaeedsadeghi is offline   Reply With Quote

Old   January 10, 2013, 08:07
Default
  #3
New Member
 
Join Date: Jan 2013
Posts: 2
Rep Power: 0
rad2013 is on a distinguished road
Hi Saeed,

Thank you, yes I knew that about the setting but my question is, which side of the box is the cell zone adjacent to. When the box is surrounded on both sides by two different fluids, how do I know which side "adjacent" refers to? Is it always the inner part of the box?

Thank you so much for your help!
rad2013 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fluentMeshToFoam multidomain mesh conversion problem Attesz OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 12 May 2, 2013 10:52
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 17:51
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 01:08
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Warning 097- AB CD-adapco 6 November 15, 2004 05:41


All times are GMT -4. The time now is 02:43.