Creating Registers on Fluent

Markat · January 11, 2013, 16:49

In my CFD simulation I only have a fluid zone. I would like to patch an initial temperatur (500K) on a boundary set as wall(named as wall_part). Should I use registers? How could i create registers for a wall?

Yanlong Li · January 12, 2013, 00:48

You can just set the boundary condition of the wall as 500K.

Markat · January 12, 2013, 08:30

If I do so the temperature will constantly be 500K! I would like to have an initial temperatur of 500K to compute heat loses (transient problem).

Yanlong Li · January 13, 2013, 05:14

You should use UDF to define the heat loss.

Markat · January 13, 2013, 12:35

My problem is not the definition of heat loss. My problem is the definiton of registers in order to be able to define an initial temperature...

Yanlong Li · January 14, 2013, 03:36

I am sorry,

Marion · January 14, 2013, 04:56

Hi,

Why do you need registers (I've never used them)? Isn't it possible for you to initialize at 500K in the initialize panel?

Marion.

Markat · January 14, 2013, 14:11

Hallo Yanlong Li,
you don't have to excuse

! Thank you for trying to help!

Hi Marion,
thank you for your reply. I could initialize the solution, but what if I want to patch an initial temperature? Patching can only be defined in zones and registers (but no walls)...

January 11, 2013, 16:49	Creating Registers on Fluent	#1
Markat New Member Join Date: Oct 2012 Posts: 27 Rep Power: 13	In my CFD simulation I only have a fluid zone. I would like to patch an initial temperatur (500K) on a boundary set as wall(named as wall_part). Should I use registers? How could i create registers for a wall?

January 14, 2013, 14:11		#8
Markat New Member Join Date: Oct 2012 Posts: 27 Rep Power: 13	Hallo Yanlong Li, you don't have to excuse! Thank you for trying to help! Hi Marion, thank you for your reply. I could initialize the solution, but what if I want to patch an initial temperature? Patching can only be defined in zones and registers (but no walls)...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
problem of running parallel Fluent on linux cluster	ivanbuz	FLUENT	15	September 23, 2017 19:12
heat transfer with RANS wall function, over a flat plate (validation with fluent)	bruce	OpenFOAM Running, Solving & CFD	6	January 20, 2017 06:22
Creating UDF file in MATLAB for Fluent	ppa381	Fluent UDF and Scheme Programming	1	October 10, 2013 09:27
Creating Matching Planes in Fluent	nha1g08	FLUENT	1	April 12, 2011 12:00

January 12, 2013, 00:48		#2
Yanlong Li Member Yanlong Li Join Date: Jan 2013 Location: BeiJing Posts: 47 Rep Power: 13	You can just set the boundary condition of the wall as 500K.

January 12, 2013, 08:30		#3
Markat New Member Join Date: Oct 2012 Posts: 27 Rep Power: 13	If I do so the temperature will constantly be 500K! I would like to have an initial temperatur of 500K to compute heat loses (transient problem).

January 13, 2013, 05:14		#4
Yanlong Li Member Yanlong Li Join Date: Jan 2013 Location: BeiJing Posts: 47 Rep Power: 13	You should use UDF to define the heat loss.

January 13, 2013, 12:35		#5
Markat New Member Join Date: Oct 2012 Posts: 27 Rep Power: 13	My problem is not the definition of heat loss. My problem is the definiton of registers in order to be able to define an initial temperature...

January 14, 2013, 03:36		#6
Yanlong Li Member Yanlong Li Join Date: Jan 2013 Location: BeiJing Posts: 47 Rep Power: 13	I am sorry,

January 14, 2013, 04:56		#7
Marion Senior Member Marion Join Date: Jul 2012 Location: France Posts: 122 Rep Power: 14	Hi, Why do you need registers (I've never used them)? Isn't it possible for you to initialize at 500K in the initialize panel? Marion.