CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Thermal Boundary Condition (http://www.cfd-online.com/Forums/fluent/112158-thermal-boundary-condition.html)

shayan_mv January 23, 2013 04:16

Thermal Boundary Condition
 
Hello Dears

I have the following case:
http://imageshack.us/photo/my-images/812/46213226.jpg/

In this case, all the walls are insulated except the outer surface of the obstacle , where a constant heat flux is applied. Air(300 Kelvin) is used as a working fluid and crosses over the heated obstacle.
I meshed the heated object, because there is a conduction inside that. Moreover, I meshed inside of the 2D channel for air crossing inside.
After importing the mesh file in Fluent, "shadow wall" is added in the Boundary condition.

What should I define the boundary condition for "water-solid interface wall(inner surface of heated object)"and "shadow wall"?

Any help would be appreciated .

Thank you

Shayan


All times are GMT -4. The time now is 18:26.