CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Ansys + Fluent 2-way FSI coupling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 6, 2013, 06:02
Default Ansys + Fluent 2-way FSI coupling
  #1
New Member
 
Join Date: Oct 2012
Posts: 9
Rep Power: 13
raditz is on a distinguished road
Dear All

I am currently carrying out 2-way FSI coupling using ANSYS(14.5)+Fluent.

My test problem is a thin solid membrane located between 2 fluids.

I am stuck at the setup of the problem where I have to input the appropriate Dynamic Mesh settings with respect to smoothing and remeshing.

The outputs are one of the following
1)Check Mesh

2)Analysis settings are not valid

3)Not all participants and system coupling system have same analysis type.


I think the problem is either with the analysis settings with respect to time stepping or Dynamic Mesh Parameters or the Solver.

Any inputs and queries are welcome.
raditz is offline   Reply With Quote

Old   February 13, 2013, 16:47
Default
  #2
Senior Member
 
Join Date: Apr 2009
Posts: 531
Rep Power: 20
stumpy is on a distinguished road
3) means that a static structural is connected to a transient Fluent, or visa-versa. Both need to be static/steady-state or both transient.
stumpy is offline   Reply With Quote

Old   February 14, 2013, 15:37
Default
  #3
New Member
 
Join Date: Oct 2012
Posts: 9
Rep Power: 13
raditz is on a distinguished road
Thanks a lot for the input.I changed the solvers.
raditz is offline   Reply With Quote

Reply

Tags
ansys 14 apdl

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
drag coefficient in ansys fluent 12.0 krishna FLUENT 19 April 12, 2018 01:49
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 27 February 6, 2018 04:34
2way FSI Fluent Mechanical SETUP Problems MainzerKaiser ANSYS 7 May 20, 2016 12:22
[GAMBIT] 3.5 years overtake by Ansys: Where are the enhancements in grid generation Volker P. ANSYS Meshing & Geometry 22 January 17, 2012 18:27
error in two way fsi kmgraju CFX 1 May 2, 2011 03:32


All times are GMT -4. The time now is 00:33.