CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Error: Divergence detected in AMG solver: x-momentum/ epsilon/ temperature (http://www.cfd-online.com/Forums/fluent/113517-error-divergence-detected-amg-solver-x-momentum-epsilon-temperature.html)

bubuchacha February 21, 2013 02:04

Error: Divergence detected in AMG solver: x-momentum/ epsilon/ temperature
 
When i run a turbine combustion chamber simulation, I encounter these divergence errors

1. Error: Divergence detected in AMG solver: x - momentum
2. Error: Divergence detected in AMG solver: Epsilon
3. Error: Divergence detected in AMG solver: temperature

Can anyone explain why did I get these errors and how to I solve in order for the calculation to continue running.

Thanks in advance.

msaeedsadeghi February 23, 2013 03:19

The mesh may not be correct.
Or you have set fluent settings incorrectly.

bubuchacha February 24, 2013 20:30

Dear Saeed Sadeghi,

I see. Thank you for the reply.

1. what are the possible fluent setting that can affect these errors?

2. How do I correct the mesh? Im new in these, so far I only know how to auto mesh the combustion chamber. do I have to specially mesh the respective boundary?

Warm regards,
Elaine

msaeedsadeghi February 25, 2013 00:07

I think the problem much more that the fine mesh.
- You may have not setted correct boundary condition.
- You may have not made the geometry correctly.
It should be investigated to find and fix the problem.

bubuchacha February 26, 2013 01:09

I have been reading your site on the meshing part but not sure how to do. Would it be possible if I show you my work and you give me some advice? I try to attached my file but is 30 kb larger. Do you have msn or email which I can show you?:)

msaeedsadeghi February 26, 2013 01:12

You can find the email from my website.

bubuchacha February 26, 2013 03:30

I tried to send to the email in the website ( saeed@me.iut.ac.ir) , but it could not get through. Is saeed@me.iut.ac.ir the email address?

Regards,
Elaine


All times are GMT -4. The time now is 21:02.