Optimization

osamaghani · July 18, 2012, 23:43

Hello everyone!

I want to do aerodynamic shape optimization using fluent, design modeller,ICEM and matlab and an optimization code( I do not know what I will use..)

Basically my aim is to;

1. create/modify a part of geometry in Matlab..
2. attach geometry to the rest of the body in CAD software..I can use solidworks ...or design modeller(i think design modeller would be efficient)
3. generate mesh in ICEM
4. simulation in FLUENT
5. send to optimizer and go to 1...and repeat until optimized solution is obtained.

I have been using these software but do not know how to communicate..I can work with replay scripts in ICEM..

I would appreciate if anyone can help me in this regards

thanks!

Marion · July 19, 2012, 04:48

Hi,
If you want to use Fluent I think the simpler way is to use it within workbench (not sure it is the cheapest!).
Within workbench, you have design modeller + ansys meshing for the mesh, then Fluent and then the optimisation package is design explorer.
With the workbench project workflow it's pretty convenient as it does everything itself (be careful with the set up though - it cannot think for you ;-)), using different types of optimisation.
We have all these packages available where I work, but I don't know about other optimisation softwares.
Marion.

osamaghani · July 19, 2012, 11:59

Hi Marion,
thanks for the reply.
Your suggestion makes sense to me but I am doing MASc research and I need more flexibility for geometry. I need to make some parts on my geometry in matlab by curves and surfaces. I can not use the dedicated CAD software for my complete geometry

if you have any material available for design explorer..I would appreciate if you could share!

stefmascio · February 26, 2013, 09:36

I suggest you to try with IOSO Optimization software.
It works very well with Matlab or Fluent and it has really good optimization algorithms!

July 18, 2012, 23:43	Optimization	#1
osamaghani New Member Osama Join Date: Mar 2012 Posts: 26 Rep Power: 14	Hello everyone! I want to do aerodynamic shape optimization using fluent, design modeller,ICEM and matlab and an optimization code( I do not know what I will use..) Basically my aim is to; 1. create/modify a part of geometry in Matlab.. 2. attach geometry to the rest of the body in CAD software..I can use solidworks ...or design modeller(i think design modeller would be efficient) 3. generate mesh in ICEM 4. simulation in FLUENT 5. send to optimizer and go to 1...and repeat until optimized solution is obtained. I have been using these software but do not know how to communicate..I can work with replay scripts in ICEM.. I would appreciate if anyone can help me in this regards thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COMSOL: optimization applied to a laminar flow	tdh89	COMSOL	0	April 30, 2012 08:57
How to do Design Optimization in Fluent 13.0?	p36288	Fluent UDF and Scheme Programming	1	July 20, 2011 00:37
Polyhedral Optimization	Mlynam	Siemens	2	August 6, 2010 11:26
BOOK ON OPTIMIZATION OF FORTRAN CODES	Alberto	Main CFD Forum	3	November 10, 2008 06:07

July 19, 2012, 04:48		#2
Marion Senior Member Marion Join Date: Jul 2012 Location: France Posts: 122 Rep Power: 14	Hi, If you want to use Fluent I think the simpler way is to use it within workbench (not sure it is the cheapest!). Within workbench, you have design modeller + ansys meshing for the mesh, then Fluent and then the optimisation package is design explorer. With the workbench project workflow it's pretty convenient as it does everything itself (be careful with the set up though - it cannot think for you ;-)), using different types of optimisation. We have all these packages available where I work, but I don't know about other optimisation softwares. Marion.

July 19, 2012, 11:59		#3
osamaghani New Member Osama Join Date: Mar 2012 Posts: 26 Rep Power: 14	Hi Marion, thanks for the reply. Your suggestion makes sense to me but I am doing MASc research and I need more flexibility for geometry. I need to make some parts on my geometry in matlab by curves and surfaces. I can not use the dedicated CAD software for my complete geometry if you have any material available for design explorer..I would appreciate if you could share!

February 26, 2013, 09:36		#4
stefmascio Member Stefano Join Date: Mar 2009 Posts: 59 Rep Power: 17	I suggest you to try with IOSO Optimization software. It works very well with Matlab or Fluent and it has really good optimization algorithms!