CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Wall treatment mesh refinement in k-omega SST model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 27, 2013, 12:32
Default Wall treatment mesh refinement in k-omega SST model
  #1
New Member
 
Jorge
Join Date: Jul 2012
Posts: 16
Rep Power: 5
Jorg is on a distinguished road
Hi,

Iīve been reading about wall treatment in eddy viscosity models. I donīt know excactly which are the y+ ranges in which a turbulence model such as the k-omega SST can be used. For example the k-epsilon models are used for y+<5 or, y+> 30 using wall functions. As the k-omega formulations are developed for wall bounded flows, do the associated meshes have to be allways refined to y+ values around 1? or is it possible to use y+ values above 30 and apply enhanced wall treatment?

Any help or reference would be greatly appreciated!

Jorge T.
Jorg is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
turn off wall functions in Transition SST model? johnp FLUENT 6 November 13, 2014 05:40
Adding layers goes wrong with SnappyHexMesh Elise OpenFOAM Native Meshers: snappyHexMesh and Others 1 April 22, 2013 02:32
snappyHexMesh refinement regions ignored guitarbren OpenFOAM Meshing & Mesh Conversion 2 April 9, 2013 03:59
snappyHexMesh aborting Tobi OpenFOAM Native Meshers: snappyHexMesh and Others 0 November 10, 2010 04:23
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43


All times are GMT -4. The time now is 21:24.