|
[Sponsors] |
September 10, 2013, 13:39 |
two phase flow through a micro channel
|
#1 |
New Member
AJITH
Join Date: Jan 2013
Posts: 10
Rep Power: 13 |
Hi ,
My problem is to find out the transition point in the microchannel ( the point where the fluid changes its phase to vapour ) so that after that there is a slug or annular flow exist..which cfd package do the best in this ...i have fluent and comsol with me..can u please guide me in completing this .... |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Divergence after change in mass flow rate in two phase flow | meetsunilkale | FLUENT | 1 | March 25, 2013 03:03 |
gas flow out of a C-D channel | ljp | FLUENT | 0 | March 7, 2011 14:32 |
Pressure outlet in two-phase flow in horizontal 2D channel | AlmostSurelyRob | Main CFD Forum | 0 | November 17, 2010 07:32 |
compressible two phase flow in CFX4.4 | youngan | CFX | 0 | July 1, 2003 23:32 |
compressible channel flow.. | R.D.Prabhu | Main CFD Forum | 0 | July 17, 1998 17:23 |