CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Convergence with reduced under relaxation and time scale factors

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By saisanthoshm88

Reply
 
LinkBack Thread Tools Display Modes
Old   March 19, 2013, 11:08
Default Convergence with reduced under relaxation and time scale factors
  #1
Senior Member
 
---------
Join Date: Oct 2010
Posts: 302
Rep Power: 8
saisanthoshm88 is on a distinguished road
In a steady state simulation if a reduction of under relaxation factor (for pressure) and a reduction of time scale factor (pseudo transient algorithm) gives convergence with the monitor points then -

Is it fine to relay on such convergence (or) is it always a must in general to
run a few more iterations by revoking the default under relaxation factor
and with a time scale factor = 1 ?

It is a pressure based coupled solver in double precission with :
pressure --> standard, momentum --> second order, turbulence --> first order, Energy equation not involved

SST turbulence model with low-Re corrections disabled
Fedor likes this.
__________________
Best regards,
Santhosh.
saisanthoshm88 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convergence with reduced under relaxation and time scale factors saisanthoshm88 CFX 3 March 20, 2013 07:04
Purpose of relaxation factors Mohsin FLUENT 5 April 30, 2010 11:57
Relaxation and convergence sammi Phoenics 0 March 20, 2008 04:32
Relaxation factors Vidya Raja FLUENT 7 September 26, 2006 20:00
relaxation factors and time accuracy Mike Main CFD Forum 7 May 21, 2005 12:41


All times are GMT -4. The time now is 11:55.