|March 27, 2013, 10:50||
Mystic error in FLUENT Solution initializtion
Join Date: Jul 2012
Posts: 45Rep Power: 5
Hi .. I created the attached geometry mode in GAMBIT and exported it in ".msh" format.
I first created the geometry as is in the pic below (Only the part above the axis .. its an axisymmetric case)
it worked 100% right....got the results....
2nd time I tried it constructing in the vertical orientation as shown below:
I gave the same BCs .. axial vel etc ..but got the following weird symbols in the initialization :
I tried to initialize manually by putting the inlet value in the initialization boxes.. but it gives "Divergence detected in AMG solver .. (for all equations if i try to change the cycle type and stability method in solutions - advanced options"
(Its v imp for my project ... after having worked so much and coming to the end of writing a huge UDF for vertical case i have come across this error! . NOTE : no udf was loaded in the above case i mentioned..its later part
Last edited by Abhya; March 28, 2013 at 08:19.
|March 28, 2013, 08:43||
Join Date: Apr 2012
Location: United Kindom
Posts: 475Rep Power: 12
It is very well documented in FLUENT documentation:
// User's Guide :: 2 // 5. Reading and Manipulating Meshes // 5.2. Mesh Requirements and Considerations // 5.2.1. Geometry/Mesh Requirements
"Axisymmetric geometries must be defined such that the axis of rotation is the x axis of the Cartesian coordinates used to define the geometry"
|Thread||Thread Starter||Forum||Replies||Last Post|
|Initial Solution Fluent||fevi84||FLUENT||1||June 25, 2012 05:27|
|Fluent jobs through pbs||ibnkureshi||FLUENT||5||June 9, 2011 13:43|
|Problem in Fluent Solution - Waves on Surface Contour||Richard_CFD||FLUENT||0||September 8, 2010 14:39|
|Why unstable solution for 3D hydrofoil in Fluent||Sajal Sengupta||Main CFD Forum||3||February 2, 2007 03:57|
|CFL Condition||Matt Umbel||Main CFD Forum||14||January 12, 2001 15:34|