CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

why my energy residual line is moving upwards instead of moving downwards in solution

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 4, 2013, 19:06
Default why my energy residual line is moving upwards instead of moving downwards in solution
  #1
New Member
 
Looeusyn
Join Date: Jan 2013
Posts: 4
Rep Power: 4
WilsonLoo is on a distinguished road
Can somebody tell why my energy residual line is moving upwards instead of moving downwards, for your information, i am doing the 3d heat sink simulation and the geometry i imported in ansys from inventor 2012. pls somebody tell what's going wrong. urgent!!!
WilsonLoo is offline   Reply With Quote

Old   April 5, 2013, 02:16
Default
  #2
New Member
 
Join Date: Dec 2012
Posts: 11
Rep Power: 4
cric92 is on a distinguished road
Well there can be a number of problems.. You might have set wrong boundary conditions or you might have an inadequate mesh
cric92 is offline   Reply With Quote

Old   April 7, 2013, 12:55
Default
  #3
Member
 
farzadpourfattah
Join Date: Mar 2013
Posts: 41
Rep Power: 4
farzadpourfattah is on a distinguished road
describe your problem,what is your material?
is your mesh good for do solution?
farzadpourfattah is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SLTS+rhoPisoFoam: what is rDeltaT??? nileshjrane OpenFOAM Running, Solving & CFD 4 February 25, 2013 05:13
pisoFoam - unstable pressure residual Industrial_CFD OpenFOAM Running, Solving & CFD 21 February 24, 2013 16:39
High Courant Number @ icoFoam Artex85 OpenFOAM Running, Solving & CFD 9 January 3, 2012 09:06
Error log vw.cfd OpenFOAM 6 August 7, 2009 05:44
Unknown error sivakumar OpenFOAM Pre-Processing 9 September 9, 2008 12:53


All times are GMT -4. The time now is 08:15.