CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

converging problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 13, 2013, 19:00
Default converging problem
  #1
New Member
 
alex lim
Join Date: Nov 2012
Posts: 1
Rep Power: 0
lx_309 is on a distinguished road
im new with ansys and how it works so im a bit lost here. i have created a mesh for a delta wing in icem. i created the surface mesh for the delta wing then created a volume mesh that expand outwards from the surface mesh for the farfield.
Then i export it to fluent. i've set the inlet of the farfield to velocity-inlet and outlet to outlet-vent. i used a k-epsilon standard model to run this test and set it for 10000 iterations. But dont know why the simulation converges in just 1 min for 150 iterations. my mesh seems to be dense enough for simulation to run but its not converging correctly. why is this so?
sorry if its not informative enough, you can ask me for more information, i just need help desperately. thank you
lx_309 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM converging Problem Markus Alzon FLUENT 6 April 7, 2016 12:41
DPM Converging Problem Aimara FLUENT 5 June 11, 2007 10:45
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 07:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 15:52


All times are GMT -4. The time now is 02:12.