how to reduce incomplete particles?
 

Hello all!

during particle tracking in my case, I got almost the whole release particles incomplete as you can see below:

DPM Iteration ....
number tracked = 60, escaped = 0, aborted = 0, trapped = 5, evaporated = 0, incomplete = 55, incomplete_parallel = 0
Parallel particle tracking concurrency: 21%

I increase the max. Number of steps to reduce the incomplete as it recommended in user manual, but nothing change!
Any suggestion in the case?

If it is a cyclone application you can read this about incomplete particles tracking:

http://www.cfd-online.com/Forums/flu...imulation.html
http://www.cfd-online.com/Forums/flu...e-cyclone.html

This could be applied also to other models.

Daniele