CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how to reduce incomplete particles?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By ghost82

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2013, 09:51
Default how to reduce incomplete particles?
  #1
Member
 
Tarantino
Join Date: Feb 2013
Posts: 46
Rep Power: 13
Tarantino is on a distinguished road
Hello all!

during particle tracking in my case, I got almost the whole release particles incomplete as you can see below:

DPM Iteration ....
number tracked = 60, escaped = 0, aborted = 0, trapped = 5, evaporated = 0, incomplete = 55, incomplete_parallel = 0
Parallel particle tracking concurrency: 21%

I increase the max. Number of steps to reduce the incomplete as it recommended in user manual, but nothing change!
Any suggestion in the case?
Tarantino is offline   Reply With Quote

Old   April 21, 2013, 10:15
Default
  #2
Senior Member
 
ghost82's Avatar
 
Rick
Join Date: Oct 2010
Posts: 1,016
Rep Power: 26
ghost82 will become famous soon enough
If it is a cyclone application you can read this about incomplete particles tracking:

http://www.cfd-online.com/Forums/flu...imulation.html
http://www.cfd-online.com/Forums/flu...e-cyclone.html

This could be applied also to other models.

Daniele
liangerscu likes this.
ghost82 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM Community Contributions 300 October 29, 2014 19:00
Problems building Paraview 3.12 on Gentoo Linux pajot OpenFOAM Installation 11 April 11, 2013 09:09
[swak4Foam] installing funkySetFields igo OpenFOAM Community Contributions 1 November 20, 2012 21:16
incomplete particles in DPM model elah599 FLUENT 1 June 26, 2011 02:37
incomplete particles jack FLUENT 2 November 11, 2007 06:21


All times are GMT -4. The time now is 06:54.