CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

phase change

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 2, 2013, 02:48
Default phase change
  #1
New Member
 
yang
Join Date: May 2013
Posts: 1
Rep Power: 0
kkkman is on a distinguished road
hi,guys
i have a big problem my case include three phase solid 、liquid and air.
solid and solid-liquid and liquid are silicon,air is argon.
i only use solidification & melting model,but no use vof model ,the silicon's solidus temperature and liquidus temperature set 1685k.
besides there has another body's cell zone condition in constant temperature ,use radiation DO model .
my question is when silicon melt must disconvergence,no matter the time step size how smaller that i set.
kkkman is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solid/liquid phase change fabian_roesler OpenFOAM 10 December 24, 2012 07:37
About phase change heat and mass transfer Michael FLUENT 2 February 13, 2011 02:49
Phase change phdsantos FLUENT 0 March 20, 2009 11:19
Two phase flow with phase change Ahmad Al-Zoubi CFX 1 November 26, 2008 04:59
How to model the solid-fluid phase change in CFX ohrmond CFX 2 May 26, 2006 06:27


All times are GMT -4. The time now is 22:43.