CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 8, 2013, 03:14
Default boundary conditions
  #1
New Member
 
yusuf gara
Join Date: Dec 2012
Posts: 13
Rep Power: 4
khodam is on a distinguished road
hi
how i can determine boundary conditions for this system :
a reactor contain on agitator , for mixing
khodam is offline   Reply With Quote

Old   May 8, 2013, 12:26
Default
  #2
New Member
 
Brandon Hathaway
Join Date: Oct 2010
Location: Minneapolis
Posts: 9
Rep Power: 6
Hathaway is on a distinguished road
Send a message via ICQ to Hathaway
I would suggest you take a look at the tutorial example found in Chapter 23 of the Fluent Tutorial guide. It describes defining cell zone conditions to represent an impeller.

The actual impeller profiles they use are based on measured data reported in an academic paper, so you'd want to check out that reference and see how applicable it would be for your usage, but the general procedure can still be followed, you'll just need to adjust the profile values based on the impeller system and size you'll be modeling.

If you have access to the ANSYS customer portal, then see: Chapter 23: Using the Eulerian Multiphase Model for Granular Flow
Hathaway is offline   Reply With Quote

Old   May 9, 2013, 06:46
Default
  #3
New Member
 
yusuf gara
Join Date: Dec 2012
Posts: 13
Rep Power: 4
khodam is on a distinguished road
thanks so much.
khodam is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
symmetry boundary conditions in cfx lost.identity CFX 41 May 22, 2013 07:21
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
Impinging Jet Boundary Conditions Anindya Main CFD Forum 24 January 11, 2012 14:40
boundary conditions and mesh exporting vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 May 27, 2010 09:38
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 18:37.