|
[Sponsors] |
May 30, 2013, 10:33 |
skewness correction
|
#1 |
Member
Sa.Baraty
Join Date: Apr 2013
Location: Iran
Posts: 50
Rep Power: 13 |
hello my friend.
I want to solve one complex geometry that has many curves.when i use SIMPLEC Method one factor (Skewness correction) appear under the SIMPLEC method in ANSYS Fluents method. How i must adjust this factor? i dont know which number must be set?1< or 1 , 2, 3, please help me |
|
August 27, 2013, 09:56 |
|
#2 |
New Member
miguel
Join Date: Jan 2010
Posts: 11
Rep Power: 16 |
I have the same problem, donīt know how to set the "skewness correction" under "pressure-velocity coupling" for SIMPLEC method. Fluent documentation and user manual is not clear, there are no tips of how to set this number, and neither which number suits each simulation.
My simulation is a steady-state simulation, with high degree of skewness, involving turbulence. Itīs a rounded shape inside a wind tunnel test section, for a given reynolds number of 2*10^5. Thanks in advance |
|
September 1, 2013, 07:03 |
|
#3 |
New Member
Harshad
Join Date: May 2013
Location: mUMBAI
Posts: 13
Rep Power: 12 |
u can do: grid>smooth/swap
do smooth first then hit swap till u see number of faces swapped: 0 u can set minimum skewness as u wish (it depends on which type of mesh u ve used) u can also convert tetrahedral mesh into poly hedra mesh which will save ur time for complex geometries good luck -Harsh |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floating point exception error | Alan | OpenFOAM Running, Solving & CFD | 11 | July 1, 2021 21:51 |
Mesh skewness correction | stainboy | OpenFOAM Running, Solving & CFD | 5 | November 9, 2018 06:45 |
Timestep and Pressure Correction Relationship in SIMPLE | rks171 | Main CFD Forum | 23 | May 4, 2012 01:04 |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
Severe nonorthogonality and severe skewness problem | qtian | OpenFOAM Running, Solving & CFD | 2 | January 22, 2008 18:47 |