CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Boundary Conditions in T Shaped geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 26, 2013, 02:13
Default Boundary Conditions in T Shaped geometry
  #1
New Member
 
Bhargav
Join Date: Jun 2013
Posts: 6
Rep Power: 3
Bhargav93 is on a distinguished road
I have a doubt in how to give discharge ratio as a given boundary condition between two outlets i am new to fluent plz help me
Bhargav93 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
non reflective boundary conditions for incompresible flow Pascal_doran OpenFOAM Programming & Development 15 August 7, 2014 05:55
ribbed channel / simpleFoam / boundary conditions beeo OpenFOAM Pre-Processing 20 July 17, 2013 08:39
[ICEM] Problems with geometry when defining boundary conditions darazsbence ANSYS Meshing & Geometry 2 February 24, 2013 09:07
boundary conditions and mesh exporting vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 May 27, 2010 09:38
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 14:08.