CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Problem in exporting cgns document

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 29, 2013, 21:02
Default Problem in exporting cgns document
  #1
New Member
 
Liu Jizhou
Join Date: Jun 2013
Posts: 1
Rep Power: 0
Darenjushi is on a distinguished road
Hello everyone, when exporting quadrupole acoustic source of fluid in cgns format in Fluent, Fluent notices a message of warning: acoustic contributions from cell zone are not considered in this formulation. And I cannot successfully export quadrupole in a right form. Have anybody encountered in the same problem?
Darenjushi is offline   Reply With Quote

Reply

Tags
acoustics, cgns, fluent, quadrupole

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
parallel support with CGNS format not yet implemented kirkrich SU2 3 January 18, 2013 16:39
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Problem exporting DATA to Techplot Rashad FLUENT 0 November 27, 2006 05:03


All times are GMT -4. The time now is 19:01.