|
[Sponsors] |
July 6, 2013, 03:42 |
Problem with Pneumatic Conveying of flyash
|
#1 |
Member
shubham
Join Date: Mar 2009
Posts: 48
Rep Power: 17 |
I am trying to model pneumatic conveying of flyash.
1.) What value of granular temperature for flyash at inlet boundary condition should i chose for this calculation? 2.) What value of viscosity of flyash have you chosen for calculation? Is it equivalent to viscosity of primary phase i.e. air? Reading material I am using does not provide this value. First I tried to model by using default value of granular temperature (i.e. .00001) but during the iteration I got an error regarding turbulent viscosity ratio limited to 1.10^5 in XXX cell which is 0.5% of total number of cells. Then I tried to reduce the mesh size but this problem remain their. I tried other solutions provided in this forum but nothing work out. According to Gidaspow et al. (1992), Lun et al. (1984) and Gidaspow and Huilin (1998) solid shear viscosity, solid bulk viscosity and solid pressure are all functions of granular temperature. So, is this problem is because of chosing wrong value of granular temperature at inlet?? Thanks in advance... Regards Shubham |
|
July 7, 2013, 12:04 |
|
#2 |
Member
shubham
Join Date: Mar 2009
Posts: 48
Rep Power: 17 |
Please help me guys...
|
|
July 9, 2013, 04:39 |
|
#3 |
Member
shubham
Join Date: Mar 2009
Posts: 48
Rep Power: 17 |
Guys Help me...
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] engineFoam new mesh problem | ayhan515 | OpenFOAM Meshing & Mesh Conversion | 5 | August 10, 2015 09:45 |
UDF compiling problem | Wouter | Fluent UDF and Scheme Programming | 6 | June 6, 2012 05:43 |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 06:59 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 07:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 20:13 |