CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to set boundary layer of a moving body in ICEM to a mesh zone for dynamic mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 13, 2013, 14:24
Default How to set boundary layer of a moving body in ICEM to a mesh zone for dynamic mesh
  #1
New Member
 
wassim
Join Date: Jun 2013
Posts: 4
Rep Power: 4
WassimCFD is on a distinguished road
I want to do dyanamic mesh in Fluent. I want to create boundary layer around the cylinder, and let the boundary layer moves without remeshing. The remeshing only happens outsite the boundary layer.

So anyone know how to set this boundary layer in to a zone or something for achieve this?
WassimCFD is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difficulty in calculating angular velocity of Savonius turbine simulation alfaruk CFX 8 December 3, 2013 17:51
[GAMBIT] periodic faces not matching Aadhavan ANSYS Meshing & Geometry 6 August 31, 2013 11:25
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 17:51
engrid: Internal volume mesh becoming coarser during boundayr layer addition Arnoldinho OpenFOAM 1 January 22, 2011 05:31
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 20:29.