CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Discrete phase in recirculation and low-Re areas

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 18, 2013, 05:09
Default Discrete phase in recirculation and low-Re areas
  #1
New Member
 
Olga Stavskaya
Join Date: Nov 2010
Location: Russia
Posts: 11
Rep Power: 6
Olga is on a distinguished road
Dear colleagues I have a problem with an unphysical increasing of discrete phase concentration in recirculation zones. The domain is an ordinary diffuser with opening angle 13 degrees. For fluid flow I use standard k-e model with standard wall functions. DPM is solved by coupled method. Under-relaxation factor for dpm is 0.01. After getting converged solution for fluid flow a recirculation zone appeared nearby the outlet of the domain. As a result after some injections of dpm I got too high concentration of solid phase in this zone and near the wall of the diffuser. By the way the problem is solved in steady manner.
Iíll be appreciate for any ideas how to avoid this issue.

Thanks.
Olga is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
recirculation at low Reynolds number Steven Main CFD Forum 7 November 27, 2000 18:29


All times are GMT -4. The time now is 06:51.