|July 29, 2013, 11:34||
flow Maldistribution in air conditioning
Join Date: Dec 2012
Posts: 24Rep Power: 5
I'm simulating the flow maldistribution in the air conditioning/refrigeration cycle, just before the evaporator,i.e. no heat transfer, only flow maldistribution due to flow stratification inside the air conditioner distributor.
My case is one phase, but it can be 2 phase flow also.
I was wondering if anyone has done/is doing anything similar, so I can refer to their work as my validation, since it's almost impossible to get experimental results for that, due to the pressure drop caused by the flow measurements.
|1 phase flow, air conditioning, maldistribution, refrigeration, validation|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Air flow simulation in volume with fan and opening||koziymf||FLUENT||0||November 14, 2011 18:44|
|mass flow in is not equal to mass flow out||saii||CFX||2||September 18, 2009 08:07|
|air bubble is disappear increasing time using vof||xujjun||CFX||9||June 9, 2009 07:59|
|Problems modeling subsonic engine air inlet with flow separation||TWaung||CFX||2||March 29, 2009 18:42|
|Air flow inside infant incubator housing...help!!!||Danny Ditroia||Phoenics||0||March 30, 2008 21:24|