|
[Sponsors] |
August 8, 2013, 16:32 |
Spray
|
#1 |
New Member
lida
Join Date: Aug 2013
Posts: 3
Rep Power: 12 |
Hi,
Is any one here familiar with DPM model in Fluent? Thanks! |
|
August 9, 2013, 02:07 |
|
#2 |
Member
EMAVI V SURYA SAMPATH
Join Date: Aug 2011
Location: Malaysia
Posts: 85
Rep Power: 14 |
Yes, how can I help you ?
and what exactly you need ? . Regards, Sampath Emani |
|
August 9, 2013, 10:56 |
Thanks for reply
|
#3 |
New Member
lida
Join Date: Aug 2013
Posts: 3
Rep Power: 12 |
Thanks for your reply.
I have a flow of water + a solvent + a liquid with a high viscosity, which is coming trough a pressured vessel via a nozzle. The target of the process is to vaporize the solvent and spate it from water and other liquid. My problem is the model set-up. I don't know How I can set up my problem correctly even for just one solvent. what I should do for the inlet and outlet I have ... and for the species ... Thanks |
|
August 10, 2013, 01:06 |
|
#4 |
Member
EMAVI V SURYA SAMPATH
Join Date: Aug 2011
Location: Malaysia
Posts: 85
Rep Power: 14 |
Hi,
Is it a spray kind of case ? for your case, there are many tutorials available on DPM. You can juz google out.! Let us know if anyting else required Regards, Sampath Emani |
|
August 10, 2013, 02:12 |
fuel spray
|
#5 |
New Member
|
hello
I have a problem with liquid fuel spray>>my case is a solid cone >>>because I am working on 3d liquid fuel combustion ,,,but when I switch on the discrete phase the velocity magnitude being too high (multiplied by 1000 or more) ...and the velocity vectors are shown too small !!!! any one could help me please |
|
August 10, 2013, 02:18 |
|
#6 |
Super Moderator
Ghazlani M. Ali
Join Date: May 2011
Location: Tokyo, Japan
Posts: 1,385
Blog Entries: 23
Rep Power: 28 |
activate DPM in models, then create your injection specifying droplets. Also you need to create your material , make sure it is "droplet". you need to do the tutorials, it explains everything step by step
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Spray total droplet momentum calculation help | tarnsharma | AVL FIRE | 0 | July 19, 2012 08:17 |
[ANSYS Meshing] Meshing for study on fuel spray | carolann | ANSYS Meshing & Geometry | 0 | June 25, 2012 02:59 |
Spray slows then stops | coastal593 | OpenFOAM Running, Solving & CFD | 6 | July 31, 2007 16:14 |
spray injection | mmacrb | FLUENT | 0 | January 10, 2007 04:57 |
problems with unsteady spray simulation | Mathias | FLUENT | 1 | July 20, 2006 16:13 |