CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Parallel process & CFD POST (http://www.cfd-online.com/Forums/fluent/122178-parallel-process-cfd-post.html)

jypark August 13, 2013 23:52

Parallel process & CFD POST
 
Hi,

I tried to post process at CFD post and my model was solved with 32 core

parallel processing.

But I got error at CFD post.

After solving with single core, there was no problem importing in CFD Post.

Therefore, I thought this resulted from parallel processing.

Can anyone help?

Sincerely yours.

oj.bulmer August 14, 2013 05:36

I really doubt that would be the case, I have seen no difference in treatment by CFD POST when the simulation was done with one core or multiple cores. Finally, your result files are the database of results at all the cells, and I don't see how the solution was obtained would affect how CFD POST reads the results.

OJ

jypark August 14, 2013 23:49

Quote:

Originally Posted by oj.bulmer (Post 445641)
I really doubt that would be the case, I have seen no difference in treatment by CFD POST when the simulation was done with one core or multiple cores. Finally, your result files are the database of results at all the cells, and I don't see how the solution was obtained would affect how CFD POST reads the results.

OJ

Dear. OJ.

Actually, I don't know where the error happened.

But i think that the problem occur in the partition which i did before using parallel processing..


All times are GMT -4. The time now is 12:04.