CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   define zones in an imported mesh (http://www.cfd-online.com/Forums/fluent/122595-define-zones-imported-mesh.html)

Jim87 August 22, 2013 16:52

define zones in an imported mesh
 
I have to work on an imported mesh and doesn't find the possibility to work on it and define zones for boundary conditions.

Importing a mesh seems to avoid the working on it. It is not possible to work on the fluent mesh tool (using the workbench). I can only go a step further and open the Ansys Fluent program. The only way I know is uing the adaption function and separating the mesh. This is not the best way (one can't mark walls, only cells), exspecial when I want to define a symmetric wall.


Does someone know an other way of definig walls for boundaries

vasava August 23, 2013 01:48

You can type 'mesh'+enter in the command window. Again and press enter. This will show you list of commands you can execute to modify mesh or mesh zones.


All times are GMT -4. The time now is 06:00.