|August 22, 2013, 21:02||
Friction factor (Cs)
Join Date: Aug 2013
Posts: 1Rep Power: 0
What is the value of surface roughness Cs (Friction factor for walls) for Brick wall in a Flue stack.
Is there a correlation between the Surface roughness Cs in fluent and the actual surface roughness E. For cement the actual E is 0.9 to 9 (mm), while for steel it is 0.05.
In Fluent the Value of Cs can be varied from 0 to 1 only.
To Add More, it is Flue gas flow analysis of a boiler chimney with a apporximate height of 200 meters. The Chimney is brick lined and cemented.
waiting for replies .....
Last edited by palplr; August 29, 2013 at 20:19.
|Thread||Thread Starter||Forum||Replies||Last Post|
|caculation of friction factor||Dilip||Main CFD Forum||9||February 23, 2016 06:00|
|the skin friction coefficient error from Fluent||sutthinan||Main CFD Forum||2||November 28, 2012 14:03|
|Skin friction in fluent is wrong||syler3321||FLUENT||2||March 24, 2011 09:05|
|Openfoam friction coefficient differences.||Peter88||OpenFOAM Post-Processing||0||February 8, 2011 11:07|
|Compute Skin friction coef by hand||Francois||FLUENT||1||February 10, 2006 07:21|