CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

[FLUENT] [ICEM] Initialisation with a soluton of a different mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 23, 2013, 09:48
Red face [FLUENT] [ICEM] Initialisation with a soluton of a different mesh
  #1
New Member
 
Bruno
Join Date: Jun 2013
Posts: 3
Rep Power: 12
piece_wood is on a distinguished road
Hello community,

I'm doing a analysis of a rocket engine for my master thesis. I have designed a 2D mesh with ICEM CFD and transferred it to FLUENT directly without using the workbench. Unfortunately, the flow is so complex that it must run in transient mode for a long time to get significant results. It is calculating now for 4 weeks to get 0.5s of real time. However, with this solution it has even been possible to identify a steady state.

Now, I want to investigate other meshes but I don't want to wait that long for the results again. I know that it is possible to initialize new meshes which have the same geometry with an existing solution, if the ANSYS mesher and the workbench are used. Is there any possibility to do the same by using only FLUENT and ICEM?
The transition of the 2D grid from ICEM to FLUENT didn't work within workbench. So using workbench is no option.

Thank you very much in advance,
Bruno
piece_wood is offline   Reply With Quote

Reply

Tags
2d-analysis, fluent 14.5, icem cfd, initialisation

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[ICEM] How to do 2D hybrid mesh around hydrofoil jaber CFX 2 January 3, 2013 19:11
[ICEM] How to do 2D hybrid mesh around hydrofoil jaber FLUENT 1 January 3, 2013 13:33
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 09:52
[ICEM] Problem making structural mesh on a surface froztbear ANSYS Meshing & Geometry 1 November 10, 2011 09:52


All times are GMT -4. The time now is 00:53.