Ansys Fluent & Transient boundary problem [pictures/files attached]
 

Hello,

I tried to define a transient velocity input for fluent using both Profiles & Tabular data method described in Ansys 14.5 documentation, the profiles are imported correctly and even I can see fluent is plotting them well in Plots->Profile data, but in the results, when I plot the velocity input for midpoint, a linear profile is plotted instead!

I've attached the .prof .ttab files.

Here is what I define at inlet :
http://imageshack.us/a/img853/7896/0l77.png


Here is what fluent gives me in results at inlet instead :

http://imageshack.us/a/img6/5259/9i3r.png


Model info :
Simple cylinder, inlet:v_u=v_inlet, outlet: p_static=0,timestep=0.01, total steps=700

What's your time step?

timestep=0.01, total steps=700