CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Brownian motion in particle tracking

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 10, 2013, 23:38
Question Brownian motion in particle tracking
  #1
Member
 
Rexxar
Join Date: May 2012
Location: Bethlehem, PA
Posts: 36
Rep Power: 5
czhao86 is on a distinguished road
Hi,

I am simulating a very simple case of surface injected particles flowing through a straight channel. If there is no Brownian motion, everything is fine as the concentration contour at each cross section is similar. However, once the Brownian motion is turned on, particle concentration at the inlet is not uniform and there is a very obvious concentration gradient, which does not make sense.

I searched the problem, and someone is saying the Brownian motion in Fluent is not very good and a UDF is needed. Is that the case?

Best,

Rexxar
__________________
Best,

Rexxar
czhao86 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dispersion model with lagragian particle tracking model for incompressible flows eelcovv OpenFOAM Running, Solving & CFD 48 January 31, 2015 11:10
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message peteryuan OpenFOAM Installation 6 August 18, 2013 18:00
ParaView ErrOr soheil nazmdeh OpenFOAM Paraview & paraFoam 1 August 17, 2013 07:40
injection problem Mark New FLUENT 0 August 4, 2013 01:30


All times are GMT -4. The time now is 08:02.