CFD Online URL
[Sponsors]
Home > Forums > FLUENT

Walls in the interior which shouldnt be there

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 16, 2013, 16:49
Default Walls in the interior which shouldnt be there
  #1
New Member
 
Join Date: Sep 2013
Posts: 4
Rep Power: 3
Frukk is on a distinguished road
Hey,

it's gonna get a bit tricky here, so if you need more infos just ask i try to explain it as good as i can:

So i have a rotor stator problem which i once calculated with fluent to check if the mesh is ok. after that i used that mesh in igg ot cut out some elements from the rotor domain. now i export it to fluent. when i now load the .msh in fluent i get walls in the the whole domain (not just the rotor domain) which are basically the surfaces of the blocking.

so my question is, is there a way to get rid of those inner walls? i can't simply change them to interior.

or is it possible to delete the elements via icem? i mean i can load in the .cas into icem and delete the elements with the edit mesh tab, but then i dont have a shell at the "gap/slit" and get an error when i try to output it in a .msh file. If i use this option how can i create a new shell for this gap?

so either

a) i use icem and create the gap and somehow create a shell for the gap?

or

b) i stay with my igg created gap, but then i have the problem with inner walls at the blocking borders when transferring the igg model to fluent. So i need a way to get rid of those inner walls.

would be awesome if you have a solution for either of those 2 ways

cheers


edit: ok we got a solution for the problem :P. so basically we have to use the igg project file to import the geometry and then the boundary conditions come out correct. just importing the cgns doesn't work

Last edited by Frukk; October 17, 2013 at 05:16. Reason: solved..
Frukk is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Shadow walls in Fluent. ICEM meshes vs Workbench aarvay ANSYS Meshing & Geometry 10 February 5, 2014 12:17
multiphaseEulerFoam loosing fluid with zeroGradient for p on walls??? petr.f. OpenFOAM Running, Solving & CFD 0 November 28, 2012 07:33
Enforce bounds error with heat loss boundary condition at solid walls Chander CFX 2 May 1, 2012 21:11
Problem with rhoSimpleFoam : exploding enthalpy and density at the walls david39 OpenFOAM Running, Solving & CFD 6 January 18, 2011 12:49
thermal conditions of walls Stefan FLUENT 2 March 23, 2003 07:17


All times are GMT -4. The time now is 18:03.