CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Input Temperature data in a 3D geometry by .Prof file in cell zone in fluent (http://www.cfd-online.com/Forums/fluent/126049-input-temperature-data-3d-geometry-prof-file-cell-zone-fluent.html)

enayath November 6, 2013 23:12

Input Temperature data in a 3D geometry by .Prof file in cell zone in fluent
 
Hello folks,

I wanna set different temperature distribution on a 3d cylinder. The problem is like at every Z I have 1 temperature(constant contour of temperature in that level). Suppose I have 5 levels in Z direction and 5 points in X direction. but in Y direction will have 10 points as for one X,we can have 2 Y...(X^2+y^2=r^2)...
Any idea how to solve this issue?

In 2D it is simple as I just need to put same number of values for X and Z and it works...

(I want fluent read a file in cell zone containg coordinates and temperature)
no Idea how to creat that file in 3D,
Thanks...


All times are GMT -4. The time now is 16:41.