|November 8, 2013, 05:41||
Steam Turbine Compressible flow convergence problem...
Join Date: Apr 2009
Posts: 157Rep Power: 8
Hi to all,
I am simulating a steam turbine secondary flow problem in Fluent.
My inlet & outlet BC Total and Static Pressure are 3.88 MPa & 3.33 Mpa respectively.I am solving for Compressible flow (Density - Ideal gas).
1. segregatted and coupled solver with various under relaxation factors
2. Raising the pressure ratio for every 50 iterations
3.Standard and Hybrid intialization
4. Mass flow inlet BC and Pressure outlet BC
But none of these methods are working for me to get good intialization and convergence.However mesh quality is also good.
Colud any one suggest me some tricks to solve this issue.
Thanks in advance.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Problem, adding passive scalar transport for turbulent, compressible flow||cryple||OpenFOAM Programming & Development||2||March 25, 2013 12:00|
|Convergence problem with target mass flow rate||ADL||FLUENT||2||May 29, 2012 21:11|
|CFD-ACE compressible flow convergence problem||DelphineL||Main CFD Forum||1||October 21, 2009 05:50|
|Compressible Convergence problem||Graeme Young||FLUENT||3||August 13, 2004 03:57|
|transient compressible flow problem (urgent plz)||jehanzeb||FLUENT||5||August 3, 2004 08:04|