CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 4, 2014, 06:11
Post Solidification
New Member
Join Date: Mar 2014
Posts: 8
Rep Power: 3
rameshcfd is on a distinguished road

I have used Ansys fluent to analyze the centrifuge casting[ it is a method in which it produces solid cylinders opposite to centrifugal casting].

Here i used a simple jar which is kept at vertical and the molten metal is poured at the velocity of 0.01 to the inlet. and i used transient state, meshing having good quality about .001 skewness.

Solution method SIMPLE is used and all other parameters at second order [energy, turbulence..] and also i given a 200rpm of rotation to the jar.

The problem is when i run the calculation for Time-step .001 for fixed time,
i got results of solidification for .01 seconds but as i increased the time the solidification is not happening, it shows more fractions of liquid in the Jar.

Please help me here .....
rameshcfd is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Modelling Solidification in Continuous Casting raagh77 FLUENT 0 January 30, 2014 01:03
solidification and melting mojtaba-azadi FLUENT 2 November 30, 2011 11:27
About the solidification? H.P.LIU Phoenics 1 December 1, 2010 10:49
Restart a solidification with previous solidifation data in v9.4 jk75 FLOW-3D 2 August 28, 2010 21:40
Restart for Solidification atulverma FLOW-3D 3 May 6, 2009 17:40

All times are GMT -4. The time now is 02:24.