Heat Flux at Interface

LaurenB · March 26, 2014, 15:12

I have a geometry where a finned structure is attached to a volume. The surface of the volume that is attached to the fins is generating heat. A fluid then cools the fins. An interface is defined between the volume and the fins and also between the volume and the fluid. I need that surface of the volume to generate heat.

I am curious about how to add a heat flux to a surface that is defined as an interface?

Thanks.

Bionico · March 27, 2014, 02:24

Hi lauren,
can you post a picture of your system? I don't understand how you have set-up the simulation

Regards

March 26, 2014, 15:12	Heat Flux at Interface	#1
LaurenB New Member Lauren Join Date: Dec 2009 Posts: 2 Rep Power: 0	I have a geometry where a finned structure is attached to a volume. The surface of the volume that is attached to the fins is generating heat. A fluid then cools the fins. An interface is defined between the volume and the fins and also between the volume and the fluid. I need that surface of the volume to generate heat. I am curious about how to add a heat flux to a surface that is defined as an interface? Thanks. Светлана likes this.

March 27, 2014, 02:24		#2
Bionico Senior Member Flavio Join Date: Sep 2011 Location: Brescia, Italy Posts: 181 Rep Power: 15	Hi lauren, can you post a picture of your system? I don't understand how you have set-up the simulation Regards Светлана likes this. __________________ Bionico

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Applying heat flux at mesh/wall interface for a solid-fluid heat transfer?	nit4tin	FLUENT	6	August 19, 2018 14:50
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
CFX13 Post Periodic interface	EtaEta	CFX	7	December 8, 2011 17:15
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 04:05
heat flux on fluid-solid interface does not match	Dai	CFX	4	October 30, 2006 08:38