creating velocity inlet in a cetain part of a face

JAISE15 · April 2, 2014, 14:29

Hi all,

I'm new to cfd. I'm trying to model a rectangular plate fin. In the bottom there is a chip. and it is surrounded by an enclosure, on the top of the enclosure, I want to select certain area and name it as velocity inlet. I'm using workbench 14.5. please help me..
thanking in advance.

anbu2cfd · April 3, 2014, 00:38

create a plane at the face of the enclosure, where you want inlet and start sketching your inlet profile, then click extrude in that see the option for add material,select the drop down list and select imprint face and give generate.

JAISE15 · April 4, 2014, 12:45

Thankzzz.. It worked..

April 2, 2014, 14:29	creating velocity inlet in a cetain part of a face	#1
JAISE15 New Member Johnson Jose Join Date: Mar 2014 Posts: 7 Rep Power: 12	Hi all, I'm new to cfd. I'm trying to model a rectangular plate fin. In the bottom there is a chip. and it is surrounded by an enclosure, on the top of the enclosure, I want to select certain area and name it as velocity inlet. I'm using workbench 14.5. please help me.. thanking in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inlet patch problems	martyn88	OpenFOAM Running, Solving & CFD	6	April 21, 2017 18:34
Problem with assigned inlet velocity profile as a boundary condition	Ozgur_	FLUENT	5	August 25, 2015 04:58
Setting Density for Velocity Inlet Face	arkie87	FLUENT	0	November 7, 2012 15:15
VOF Volume fraction in Velocity inlet	aruelle	FLUENT	1	March 18, 2010 11:53
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

April 3, 2014, 00:38		#2
anbu2cfd New Member anbu Join Date: Mar 2014 Posts: 25 Rep Power: 12	create a plane at the face of the enclosure, where you want inlet and start sketching your inlet profile, then click extrude in that see the option for add material,select the drop down list and select imprint face and give generate.

April 4, 2014, 12:45		#3
JAISE15 New Member Johnson Jose Join Date: Mar 2014 Posts: 7 Rep Power: 12	Thankzzz.. It worked..