|
[Sponsors] |
Help me dear friends in simulating wind catcher |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 5, 2014, 11:15 |
Help me dear friends in simulating wind catcher
|
#1 |
New Member
NASREDDINE
Join Date: Apr 2014
Posts: 2
Rep Power: 0 |
Hi every one, i am try to simulate the effect of wind catcher on thermal behavior of house in arid region. system is composed of macro climat (outside environment composed of air) and micro climat which is house+tower. I use LES in fluent 6, i have 2 problems: first pression distribution around house+tower (it must be positiv on wind ward and negatif on lee ward) to ensure air circulation or sucction force. second i have change in tower temperature wich rase from tower inlet (300K) until tower outlet (309K), but i dont have any changes in house temperature (310K).(wall are smooth becuase LES does'nt treat wall roughness even reaserch use LES and have pressure differences between lee and wind ward) and wall are adiabatic (so where the rise in T come from ?????). my BC are:
macro inlet: velocity. macro outlet: pressure outlet 1atm. tower inlet: velocity inlet tower outlet: pressure outlet. house window: pressure outlet. i have initilize my calculations with: X velocity 3m/s and 300 K. and i start calculation form all region, and then i try with macro inlet and the same 2 problems appears. Help dear friends because i runnig out of my time in my thesis. contact me on facebook or my email: sakanasro69@gmail.com. thanks thanks thanks dear friends. remarque: i try several model k-3, DES, spallart allmaras, but only LES give convergence with 220 iters with i3 process 4 GB memory. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind Turbine - Rotation of the Baldes | moonomid | CFX | 32 | March 18, 2016 19:34 |
Ducted wind turbine (BC for the shroud) | Pepita | CFX | 4 | June 29, 2013 07:09 |
simulating flow wind in building | teguhtf | FLUENT | 0 | April 21, 2011 02:01 |
simulating wind over terrain | yairsuari | OpenFOAM | 3 | October 26, 2010 17:25 |
Dear friends, please advise.. | Amer | Main CFD Forum | 0 | April 4, 2000 03:54 |