Home > Forums > Software User Forums > ANSYS > FLUENT

inflation with sweep meshing

Updated Threads

Reply

Search this Thread

April 11, 2014, 08:46	inflation with sweep meshing	#1
jayash New Member jayash kumar Join Date: Apr 2014 Posts: 3 Rep Power: 12	Hello all i have a inverted T type geometry in 3 D. geometry having 1 part body with 2 solid one is vertical column and second is horizontal. since vertical column placed above the horizontal. i have done sweep mesh longitudinally by selecting side faces. i would like to create inflation layers on the surface of horizontal beam surround vertical column square area. please help

Reply

Tags

inflation layer, meshing 3d

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Meshing of bullet farfield (via inflation)	Hernus	ANSYS Meshing & Geometry	0	February 19, 2014 04:00
[ANSYS Meshing] Inflation - Airfoil Meshing - Divergence problem	dalecooper	ANSYS Meshing & Geometry	0	July 19, 2013 07:04
[ANSYS Meshing] Unwanted bias while meshing a tube with sweep and inflation	rasko	ANSYS Meshing & Geometry	7	July 23, 2012 10:31
[ANSYS Meshing] Inflation conflict betwee Automatic Meshed Body and Sweep Meshed Body	PvS	ANSYS Meshing & Geometry	2	June 26, 2011 14:22
ANSYS Meshing: Structured Mesh with Inflation	Antanas	ANSYS Meshing & Geometry	1	June 18, 2011 20:23

All times are GMT -4. The time now is 03:45.