|
[Sponsors] |
November 1, 2016, 07:13 |
solver setting, boundary conditions
|
#1 |
New Member
Aseel
Join Date: Oct 2016
Posts: 23
Rep Power: 9 |
Hello everyone
i am currently using ice for cold flow simulation. however, i have faced some problem duringthe solver set up and set up process as follows 1- i have encounter a problem during solver setting. i have notice that the boundary conditions is not automatically generated and when i want to create new boundary conditions there is not zones showed in the zone window (refer to the picture 1).pic1.jpg 2- during the set up process, the dynamic mesh is not automatically set up and i need to set it manually. however , the zones are not generated completely as in the tutorial (refer to picture 2).pic2.PNG i don't know how to proceed with these issues exist. can anyone help,please? thank you |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 02:13 |
Centrifugal fan | j0hnny | CFX | 13 | October 1, 2019 14:55 |
Error - Solar absorber - Solar Thermal Radiation | MichaelK | CFX | 12 | September 1, 2016 06:15 |
Difficulty In Setting Boundary Conditions | Moinul Haque | CFX | 4 | November 25, 2014 18:30 |
[snappyHexMesh] determining displacement for added points | CFDnewbie147 | OpenFOAM Meshing & Mesh Conversion | 1 | October 22, 2013 10:53 |