|
[Sponsors] |
April 28, 2014, 20:27 |
Convert Flow Time to Crank Angle
|
#1 |
New Member
William
Join Date: Jan 2013
Location: Statesboro,Ga
Posts: 6
Rep Power: 13 |
I am trying to find the correct equation to convert flow time to crank angle.
My case is a 4 stroke engine with a 720 degree crank period. The case starts at 555 degrees. The RPM is 1200. I have used a few different equations that gave me questionable results. Any advice? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
simpleFoam error - "Floating point exception" | mbcx4jc2 | OpenFOAM Running, Solving & CFD | 12 | August 4, 2015 02:20 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
Help for the small implementation in turbulence model | shipman | OpenFOAM Programming & Development | 25 | March 19, 2014 10:08 |
AMI interDyMFoam for mixer nu problem | danny123 | OpenFOAM Programming & Development | 8 | September 6, 2013 02:34 |
Flow around cube and cube natural convection | Mirage12 | OpenFOAM Running, Solving & CFD | 5 | June 15, 2013 11:20 |