Home > Forums > Software User Forums > ANSYS > FLUENT

Profile data to initialize cell zone variables

Updated Threads

Reply

Search this Thread

May 8, 2014, 02:12	Profile data to initialize cell zone variables	#1
David Christopher New Member Dave Christopher Join Date: Dec 2009 Posts: 26 Rep Power: 16	I am trying to copy data from one mesh to an expanded mesh in Fluent. I want to use the Profile command to input the data from a previous result into a new mesh in the cell zones. I have read the data and can plot the data, but it will not initialize the variables for the calculation in the cell zone region (with or without initialization). The help file says this should work, but I am not successful. Any suggestions?

Reply

Tags

fluent, initialization, profile

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] periodic faces not matching	Aadhavan	ANSYS Meshing & Geometry	6	August 31, 2013 11:25
About Cell Zone Conditions	Liufeng_ustb	FLUENT	0	May 17, 2013 23:28
Change cell zone index/thread during simulation	neilduffy1024	FLUENT	0	January 17, 2011 09:40
Cells with t below lower limit	Purushothama	Siemens	2	May 31, 2010 21:58
CFXSolver Error Message using Profile Data on B	Tobias	CFX	0	August 26, 2005 07:27

All times are GMT -4. The time now is 22:46.