CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

two phase separation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 3, 2014, 03:01
Default two phase separation
  #1
New Member
 
ali91
Join Date: Jun 2014
Posts: 3
Rep Power: 3
abraham91 is on a distinguished road
Hi,

Currently, I am doing Fluent simulation regarding to the two phase separation at tee pipe. Below are my input parameters

air velocity = 27.432 m/s
water velocity = 0.02339 m/s
volume fraction of water = 0.00085
flow rate weighing at side arm = 0.3
flow rate weighing at run arm = 0.7

In the result, the % of gas going into the side arm is approximately accurate but the % of liquid going into the side arm is inaccurate and its value is the same as % of gas going into side arm. Same problem is observed when I am trying to manipulate the flow rate weighing of both side and run arm. Maybe the amount of water is too small.

Any idea on this problem ??? thanks in advance
abraham91 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with phase separation in t-junction estenmark FLUENT 2 June 3, 2014 20:18
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 14 September 18, 2011 13:46
Tutorial Phase separation FLUENT (HELP) sincity FLUENT 6 July 20, 2011 03:25
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32


All times are GMT -4. The time now is 02:01.