CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

dynamic mesh not deforming in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 12, 2014, 22:13
Question dynamic mesh not deforming in fluent
  #1
New Member
 
saleh Gharaie
Join Date: May 2014
Posts: 3
Rep Power: 11
saleh_1_2 is on a distinguished road
Hi Guys,

I am doing FSI with strong coupling for a flexibale valve. I defined dynamic mesh, system coupling for the fluid-solid interface in the fluent but the mesh in fluent is not deforming while the valve deformed in transient structure solution. the mesh type is all tetrahedrone for the fluent. please see attached file to have a better understanding of the problem.
Thank you in advanced guys to helm me out.
Attached Files
File Type: doc fsi-issue.doc (71.5 KB, 25 views)
saleh_1_2 is offline   Reply With Quote

Old   June 4, 2014, 19:27
Default
  #2
New Member
 
AZ
Join Date: Jan 2014
Posts: 17
Rep Power: 12
mjthomp3 is on a distinguished road
Quote:
Originally Posted by saleh_1_2 View Post
Hi Guys,

I am doing FSI with strong coupling for a flexibale valve. I defined dynamic mesh, system coupling for the fluid-solid interface in the fluent but the mesh in fluent is not deforming while the valve deformed in transient structure solution. the mesh type is all tetrahedrone for the fluent. please see attached file to have a better understanding of the problem.
Thank you in advanced guys to helm me out.

I am also doing a fluid structure interaction problem. Let me know if you find anything.....I am simulating a piston moving up and down.
mjthomp3 is offline   Reply With Quote

Old   June 4, 2014, 19:30
Default Dynamic mesh for piston moving up and down
  #3
New Member
 
AZ
Join Date: Jan 2014
Posts: 17
Rep Power: 12
mjthomp3 is on a distinguished road
Hi Everyone,

I am simulating a dynamic mesh simulation. The issue is with the in-cylinder settings. Does anyone have experience with the setup of these simulations to help out?
mjthomp3 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 27 February 6, 2018 04:34
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
fluent doesnt read 1D coating mesh - advice needed FuzzyDice FLUENT 5 September 28, 2011 17:34
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 05:39.