Fluent animation

mary91 · June 17, 2014, 11:51

Hi everybody,

I am running transient simulations in Fluent. I would like to know if it is possible to create an animation from the cas & dat file of the simulation. I only could create animations setting up a sequence at the beginning of the simulation (in Calculation Activities), but this slow down the simulation. Any suggestions?

Thanks in advance!

Sun · June 18, 2014, 04:11

Hi,
If you have access to CFDPost of workbench you can create animations with that and if not, you can generate sequential images of your results (e.g. contour plots of velocity or pressure on different planes) while you are running your simulation. Then, using any third party software or online tools (like gifmaker.me) you would be able to convert those images into an animation.
Cheers!

mary91 · June 18, 2014, 06:12

Hi Sun,
thank you for your reply!How can I create a sequence of figures of my results? I was able to do that only creating a sequence in calculation activities, are there other possibilities?

Sun · June 18, 2014, 07:02

If I remember correctly, you can do it on solve>define>Animation...and there, you can define the type of results and the frequency. Probably this is what you have already done! if it is the case, sorry !
BTW, there is also this other software for converting pics to avi (www.easytornado.com), and it is free, you might want to check it out.
Cheers!

June 17, 2014, 11:51	Fluent animation	#1
mary91 New Member Marianna Mercogliano Join Date: May 2014 Posts: 7 Rep Power: 11	Hi everybody, I am running transient simulations in Fluent. I would like to know if it is possible to create an animation from the cas & dat file of the simulation. I only could create animations setting up a sequence at the beginning of the simulation (in Calculation Activities), but this slow down the simulation. Any suggestions? Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Animation in Fluent	jackr84	FLUENT	4	November 19, 2013 02:46
FLUENT animation axis labels	taylorfe	FLUENT	2	June 1, 2012 17:39
Fluent 12 Animation	sahm	ANSYS	2	November 5, 2010 17:45
animation in fluent	doki	FLUENT	0	June 10, 2010 08:04
ANIMATION with Fluent	Luca	FLUENT	0	June 6, 2005 04:13

June 18, 2014, 04:11		#2
Sun Senior Member Join Date: Nov 2010 Posts: 103 Rep Power: 15	Hi, If you have access to CFDPost of workbench you can create animations with that and if not, you can generate sequential images of your results (e.g. contour plots of velocity or pressure on different planes) while you are running your simulation. Then, using any third party software or online tools (like gifmaker.me) you would be able to convert those images into an animation. Cheers!

June 18, 2014, 06:12		#3
mary91 New Member Marianna Mercogliano Join Date: May 2014 Posts: 7 Rep Power: 11	Hi Sun, thank you for your reply!How can I create a sequence of figures of my results? I was able to do that only creating a sequence in calculation activities, are there other possibilities?

June 18, 2014, 07:02		#4
Sun Senior Member Join Date: Nov 2010 Posts: 103 Rep Power: 15	If I remember correctly, you can do it on solve>define>Animation...and there, you can define the type of results and the frequency. Probably this is what you have already done! if it is the case, sorry ! BTW, there is also this other software for converting pics to avi (www.easytornado.com), and it is free, you might want to check it out. Cheers!