 |
 |
 |
|
|
|
[Sponsors] | ||||
Strange temperature changes around boundaries |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 30, 2014, 07:18
|
Strange temperature changes around boundaries
|
#1 |
|
New Member
Join Date: Jun 2014
Posts: 1
Rep Power: 0  |
I have been trying to calculate temperature field of air around a building.
The mesh in Z=0 plane around the building is shown in attachment 2.jpg. I used RNG for viscous modelling and DO (solar loading) for radiation. The absorption coefficient of air is 1. building is 0.1. ground is 0.2. For building and ground, the Thermal mode is set as Mixed. I intended to use Coupled, however, the option does not show. The strange calculation result is as shown in 1.jpg. Anyone knows what the problem is? Many thanks! |
|
|
|
|
|
| Tags |
| fluent, radiation temperature |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| whats the cause of error? | immortality | OpenFOAM Running, Solving & CFD | 13 | March 24, 2021 07:15 |
| Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
| is internalField(U) equivalent to zeroGradient? | immortality | OpenFOAM Running, Solving & CFD | 7 | March 29, 2013 01:27 |
| Inlet won't apply UDF and has temperature at 0K! | tccruise | Fluent UDF and Scheme Programming | 2 | September 14, 2012 06:08 |
| Too low temperature at combustor outlet | romekr | FLUENT | 2 | February 6, 2012 10:02 |
Linear Mode
