What is Parcel in DPM model?
Hello all.
I'm modeling a water spray which is in cross flow with hot air. So the hot air which has a high velocity,about 500 m/s, cause the water drops to breakup to small droplets and evaporate. But as far as I investigated, the rate of evaporation completely depends on your Parcel which is non sense! I tried Parcel mass = 1e-5 Kg, 1e-6 Kg, 1e-7 Kg, 1e-8 Kg and the evaporated mass become less and less as I decrease Parcel mass. I've read what is in the manual and I know it is a group of Particles. but I need to know more about it as for example what is Parcel diameter and what is parcel mass? I assumed parcel mass is sum of its particles mass but seems it is not. as you can give a big diameter for particle "set injection properties" so mass of a particle become too large and then give the parcel mas a small number and still no error or warning and it solves! please help me. I myself have found many things by trial and error but there is still a lot I cant understand. any answer is highly appreciated. |
All times are GMT -4. The time now is 11:15. |