CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Dynamic mesh settings for sloshing problems.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 7, 2014, 02:48
Default Dynamic mesh settings for sloshing problems.
  #1
Member
 
Join Date: Sep 2014
Posts: 43
Rep Power: 2
darkluix88 is on a distinguished road
Good morning guys,
as in the title of the thread, I would an help to put the Dynamic Mesh settings for sloshing problem. I have a tank filled of water and I want to simulate a particular udf movement, for example a sinusoidal velocity along x direction, so that the tank moves, the water inside generates waves but I don't want to deform the geometry of the cells inside the mesh!
I'm working in Layering (without Remeshing) and I ve set rigid body not only to the walls but also to interior and/or fluid inside, with no result...
Can anyone help me, please? Is it too important for my thesis, thanks to all!
darkluix88 is offline   Reply With Quote

Old   November 7, 2014, 17:32
Default
  #2
Member
 
Join Date: Sep 2014
Posts: 43
Rep Power: 2
darkluix88 is on a distinguished road
Please, anyone can help me? thanks in advance...
darkluix88 is offline   Reply With Quote

Old   November 10, 2014, 14:29
Default
  #3
New Member
 
ricky
Join Date: Feb 2014
Posts: 5
Rep Power: 3
ricky is on a distinguished road
try to set rigid body except the default interior and the fluid
ricky is offline   Reply With Quote

Old   November 10, 2014, 14:36
Default
  #4
New Member
 
ricky
Join Date: Feb 2014
Posts: 5
Rep Power: 3
ricky is on a distinguished road
sir, i've same topics with you for my final project about sloshing in tank, but there was always error in a certain time step.
ricky is offline   Reply With Quote

Old   November 10, 2014, 16:46
Default
  #5
Member
 
Join Date: Sep 2014
Posts: 43
Rep Power: 2
darkluix88 is on a distinguished road
Hi ricky and thanks for your reply,
I've already tried to select only the tank as rigid body (without fluid and interior) and select/deselect layering, but the result is the same...the iteration proceeds for few steps and next the error of "negative volume cells" is detected.
Maybe through email I can pass the cas and data files, thanks for the help
darkluix88 is offline   Reply With Quote

Old   November 18, 2014, 23:45
Default
  #6
New Member
 
ricky
Join Date: Feb 2014
Posts: 5
Rep Power: 3
ricky is on a distinguished road
sir, do you have solve your problem yet..?
ricky is offline   Reply With Quote

Old   November 18, 2014, 23:48
Default
  #7
New Member
 
ricky
Join Date: Feb 2014
Posts: 5
Rep Power: 3
ricky is on a distinguished road
i've done my work..
and nothing error in my work..

please tell me your email, because i wanna sent you some file, hopefully can helping you
ricky is offline   Reply With Quote

Old   November 18, 2014, 23:54
Default
  #8
New Member
 
ricky
Join Date: Feb 2014
Posts: 5
Rep Power: 3
ricky is on a distinguished road
from what university do you from,sir..?
ricky is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Update of the variables after dynamic mesh motion. gtg258f OpenFOAM Programming & Development 9 January 18, 2014 11:08
potentialFreeSurfaceFoam with Dynamic Mesh GuilhermeMP OpenFOAM Programming & Development 1 October 6, 2013 03:05
Dynamic Mesh Problems DSMeck Fluent UDF and Scheme Programming 0 May 7, 2012 07:09
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 09:38
Can Fidap solve dynamic mesh problems? Sandy FLUENT 0 September 29, 2003 00:45


All times are GMT -4. The time now is 18:27.