|
[Sponsors] |
What are the MIN and Max diameter in cloud tracking model? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 30, 2015, 14:52 |
What are the MIN and Max diameter in cloud tracking model?
|
#1 |
Member
Join Date: May 2009
Posts: 58
Rep Power: 16 |
Hello,
I want to use the cloud tracking model instead of stochastic model. In my problem I have solid particles in a sharp bend and I want to track the particles in the bend. My question is what is the min an max diameter in this approach? I tried different numbers but the tracking does not finish and stopped it because it seems it will last forever. I think I do not pick the right numbers for Min and Max in cloud tracking model. What are those numbers? Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ and u+ values with low-Re RANS turbulence models: utility + testcase | florian_krause | OpenFOAM | 114 | August 23, 2023 05:37 |
multiphase turbulance case floating error | harsha_kulkarni | OpenFOAM Running, Solving & CFD | 3 | February 18, 2016 05:06 |
Problem of simulating of small droplet with radius of 2mm | liguifan | OpenFOAM Running, Solving & CFD | 5 | June 3, 2014 02:53 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
On the damBreak4phaseFine cases | paean | OpenFOAM Running, Solving & CFD | 0 | November 14, 2008 21:14 |