CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Picture-in-Picture in FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 20, 2015, 08:27
Default Picture-in-Picture in FLUENT
  #1
New Member
 
Matthew Kube-McDowell
Join Date: Sep 2012
Posts: 4
Rep Power: 4
mkubemcd is on a distinguished road
I'm post-processing a FLUENT case, and what I'd like to do is generate some contours on plane cuts through the geometry and display them flat, while superimposing down in one corner a picture of the mesh and the cutplane, providing a visual indicator of the contour plot's location. I'm envisioning something like a TV's "picture-in-picture" functionality. I know it's possible to overlay contours with vectors and mesh, but, as far as I can tell, the Overlay function only allows a single camera location and view, which wouldn't work for this. I just learned how to do this in STAR-CCM+, so I just wanted to check if it's possible in FLUENT without an external graphics editor.

Thanks for any advice.
mkubemcd is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
fluent parallel problem in win7 x64 system dunga82 FLUENT 8 April 19, 2012 20:23
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 02:44
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
First picture of Fluent 6.4 ck3 FLUENT 2 December 6, 2007 12:27


All times are GMT -4. The time now is 15:37.