CFD post processing

shrutee89 · July 28, 2015, 02:58

hello everyone.

I am working with 2 phase flow in thin film reactor. I am obtaining similar colorful profiles for all temperatures having different legends. I am attaching the contours of temperature at different temperatures. I wanted to know if there is an option of fixing the legends for different temperatures (i.e for 120-130oC it should display different shades of blue, 130-140oC it should display different shades of pink, 140-150oC it should display different shades of red and similarly for other temperature ranges). It becomes easier to interpret the results having same legend for different temperature profile. Can anyone please help me on this issue? I hope to get reply.

Thank you,

Regards,
Shrutee L

Attachments:
125oC.jpg

135oC.jpg

protussa · August 3, 2015, 05:33

When you plot the contours, disable Auto Range (and also clip to Range) and provide the range (Min and Max) of values that you want for each plot. Make sure you use the same range for all the plots.
This way, your range will be the same in all plots and you will be able to compare plots easily.

shrutee89 · August 12, 2015, 13:46

Thank you. It was helpful

Ramtin · August 17, 2015, 04:40

I recieve "C:\Program Files\ANSYSI~1\v161\fluent\fluent16.1.0\cortex\win 64\cx1610.exe received fatal signal (ACCESS_VIOLATION)" when I tried to plot a contour in fluent. Deos anyone knows about the error?

July 28, 2015, 02:58	CFD post processing	#1
shrutee89 New Member Shrutee L Join Date: Apr 2015 Posts: 2 Rep Power: 0	hello everyone. I am working with 2 phase flow in thin film reactor. I am obtaining similar colorful profiles for all temperatures having different legends. I am attaching the contours of temperature at different temperatures. I wanted to know if there is an option of fixing the legends for different temperatures (i.e for 120-130oC it should display different shades of blue, 130-140oC it should display different shades of pink, 140-150oC it should display different shades of red and similarly for other temperature ranges). It becomes easier to interpret the results having same legend for different temperature profile. Can anyone please help me on this issue? I hope to get reply. Thank you, Regards, Shrutee L Attachments: 125oC.jpg 135oC.jpg

August 3, 2015, 05:33	disable auto range in fluent contours	#2
protussa New Member R P Join Date: Jul 2012 Location: India Posts: 6 Rep Power: 13	When you plot the contours, disable Auto Range (and also clip to Range) and provide the range (Min and Max) of values that you want for each plot. Make sure you use the same range for all the plots. This way, your range will be the same in all plots and you will be able to compare plots easily. shrutee89 likes this.

August 17, 2015, 04:40	Fatal error	#4
Ramtin New Member Join Date: Aug 2015 Posts: 1 Rep Power: 0	I recieve "C:\Program Files\ANSYSI~1\v161\fluent\fluent16.1.0\cortex\win 64\cx1610.exe received fatal signal (ACCESS_VIOLATION)" when I tried to plot a contour in fluent. Deos anyone knows about the error?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Design...The CFD Future	John C. Chien	Main CFD Forum	20	November 19, 2015 23:40
How to visualize Output Equation Residuals in CFD Post	rubin4ik	CFX	2	June 22, 2011 06:37
NO model vs post processing in coal combustion,CFX	sakalido	CFX	1	April 15, 2011 14:07
post processing for KIVA	dirga	Main CFD Forum	5	April 23, 2009 10:58
post processing in CFD	MANISH BHARGAVA	Main CFD Forum	0	October 17, 1998 20:51

August 12, 2015, 13:46		#3
shrutee89 New Member Shrutee L Join Date: Apr 2015 Posts: 2 Rep Power: 0	Thank you. It was helpful